Mobile Gaming
Zenless Zone Zero — Controller support on Android: what works
Every guide I can find skips the part I am actually stuck on. The in-game explanation and the actual behaviour do not appear to match.
- android
- controllers
Page 1 of 2 · 21 posts
MFMaya F. #1@mayaf · 16 Jan 2026, 09:33
Every guide I can find skips the part I am actually stuck on. The in-game explanation and the actual behaviour do not appear to match.
The thing that keeps tripping me up is that everyone assumes you already know the basics, and the wiki is out of date. Curious whether that matches what everyone else is seeing.
DPDamian Piszczek #2Damian PiszczekAdmin@damianpiszczek · 16 Jan 2026, 21:29
From experience, if it only happens in one mode, that narrows it down considerably.
DPDamian Piszczek #4Damian PiszczekAdmin@damianpiszczek · 18 Jan 2026, 22:26
The usual fix here is give it a clean reinstall before assuming the hardware is at fault.
SHShadowstein #5@shadowstein · 18 Jan 2026, 22:33
Slightly different take — the averages hide the problem; look at the one percent lows instead.
SHShadowstein #6@shadowstein · 20 Jan 2026, 06:10
Adding to the above: the trick is to change one thing at a time and actually note the result before touching anything else.
Report back once you have tried it.
DPDamian Piszczek #7Damian PiszczekAdmin@damianpiszczek · 20 Jan 2026, 11:14
Speaking as someone who got it wrong initially, worth testing on a second account to rule out something profile-specific.
Good luck, it is a common snag.
GLGlitchwave #9@glitchwave · 21 Jan 2026, 10:39
Not the answer you want, but ignore the loudest advice; the boring answer is usually the correct one here.
Report back once you have tried it.
SHShadowstein #10@shadowstein · 22 Jan 2026, 11:10
Had the exact same issue. it is almost always a setting rather than hardware, so try the free fixes before spending anything.
DPDamian Piszczek #11Damian PiszczekAdmin@damianpiszczek · 22 Jan 2026, 16:10
Only partly related, but do not copy someone else’s config wholesale — start from defaults and adjust to your own setup.
GLGlitchwave #12@glitchwave · 23 Jan 2026, 03:46
I went through this last month. the averages hide the problem; look at the one percent lows instead.
YEYusuf E. #13@yusuf_e · 23 Jan 2026, 21:49
This is the bit people miss — nine times out of ten it is a driver or a background process, not the thing you suspect.
MTMarco T. #14@marco_t5 · 24 Jan 2026, 11:16
I went through this last month. measure before and after, otherwise you are just guessing whether it helped.
MTMarco T. #15@marco_t5 · 25 Jan 2026, 04:15
Counterpoint: the defaults are conservative on purpose, so there is usually headroom to gain.
Let us know which part worked.
DPDamian Piszczek #16Damian PiszczekAdmin@damianpiszczek · 25 Jan 2026, 07:10
Depends on your setup, but broadly give it a clean reinstall before assuming the hardware is at fault.
DPDamian Piszczek #17Damian PiszczekAdmin@damianpiszczek · 26 Jan 2026, 17:52
Same boat here. if it only happens in one mode, that narrows it down considerably.
MTMarco T. #18@marco_t5 · 27 Jan 2026, 00:13
Adding to the above: temperature is the usual culprit when performance degrades over a session.
Good luck, it is a common snag.
DPDamian Piszczek #20Damian PiszczekAdmin@damianpiszczek · 27 Jan 2026, 09:55
From experience, nine times out of ten it is a driver or a background process, not the thing you suspect.
That fixed it for me, at least.