Skip to main content
RespawnDailyExplore

Neverness to Everness

NTE on mobile — how does it actually run? (second attempt)

Every guide I can find skips the part I am actually stuck on. The numbers look fine on paper, but it feels noticeably worse in practice.

17 replies635 viewsStarted 24 d agoLast activity 18 d ago
  • mobile
  • performance
  1. Damian Piszczek
    Damian PiszczekAdminOriginal post

    @damianpiszczek · 6 Jul 2026, 18:23

    #1

    Every guide I can find skips the part I am actually stuck on. The numbers look fine on paper, but it feels noticeably worse in practice.

    I assumed it was a known issue, but I cannot find anyone else describing it. Hopefully this saves someone else the afternoon it cost me.

  2. Ironryu

    @ironryu · 7 Jul 2026, 10:17

    #2

    Counterpoint: region and server load matter more than most guides acknowledge.

  3. Ines N.

    @ines_n19 · 7 Jul 2026, 10:18

    #3

    Only partly related, but keep a note of what you changed, otherwise you cannot undo it cleanly later.

  4. Theo T.

    @theo_t · 8 Jul 2026, 00:50

    #4

    Speaking as someone who got it wrong initially, the defaults are conservative on purpose, so there is usually headroom to gain.

  5. Halcyonkite

    @halcyonkite · 8 Jul 2026, 03:02

    #5

    Slightly different take — the defaults are conservative on purpose, so there is usually headroom to gain.

  6. Noa K.

    @noa_k · 8 Jul 2026, 03:25

    #6

    Slightly different take — region and server load matter more than most guides acknowledge.

  7. Ines N.

    @ines_n19 · 8 Jul 2026, 23:17

    #7

    For what it is worth, the trick is to change one thing at a time and actually note the result before touching anything else.

  8. Lena G.

    @lena_g · 9 Jul 2026, 08:49

    #8

    Short version: give it a clean reinstall before assuming the hardware is at fault.

  9. Theo D.

    @theo_d · 9 Jul 2026, 12:42

    #9

    The usual fix here is do the cheap diagnostic first — it costs nothing and rules out half the causes.

  10. Aya D.

    @aya_d · 9 Jul 2026, 23:02

    #10

    From experience, you get most of the benefit from the first adjustment; everything after that is marginal.

    That fixed it for me, at least.

  11. Vertexvex

    @vertexvex · 10 Jul 2026, 07:25

    #11

    Slightly different take — the wiki number is theoretical; real results are always a bit lower.

  12. Embernyx

    @embernyx · 10 Jul 2026, 14:08

    #12

    Depends on your setup, but broadly it is almost always a setting rather than hardware, so try the free fixes before spending anything.

  13. Onyxfen

    @onyxfen · 11 Jul 2026, 00:42

    #13

    From experience, give it a clean reinstall before assuming the hardware is at fault.

  14. Saberflare

    @saberflare85 · 11 Jul 2026, 06:54

    #14

    Same boat here. the defaults are conservative on purpose, so there is usually headroom to gain.

  15. Aria G.

    @aria_g · 11 Jul 2026, 09:55

    #15

    Only partly related, but temperature is the usual culprit when performance degrades over a session.

  16. Blazenyx

    @blazenyx15 · 12 Jul 2026, 00:50

    #16

    This is the bit people miss — ignore the loudest advice; the boring answer is usually the correct one here.

  17. Sam F.

    @sam_f · 12 Jul 2026, 04:21

    #17

    Only partly related, but do the cheap diagnostic first — it costs nothing and rules out half the causes.

  18. Arccore

    @arccore · 12 Jul 2026, 08:03

    #18

    Slightly different take — you get most of the benefit from the first adjustment; everything after that is marginal.

    Let us know which part worked.

Be specific and civil. Referral links are removed automatically.